Optical Fiber Ribbon Machine – Verify The Ratings..

How well do you know fiber optic cables? If you don’t have lots of information regarding the cables here are a few facts that you need to find out about them. Although an Optical Fiber Ribbon Machine is made of glass and some of its areas require plenty of care, a total fiber was created in a way that it’s able to withstand even the most rugged installations. As an example, cat 5/5e/6/6A has a pulling tension of 25 pounds. There are more optics that are designed to withstand over 200 pounds of pulling tension.

Research research indicates that a fiber optic can withstand higher pulling tension than copper. Furthermore, it’s rated for larger temperature ranges and is also resistant to EM/RFI interference.

Fiber Is More Secure

Since details are carried within the cable, the details are more secure than in other cables; therefore, it’s difficult to hack the details. While it’s difficult to hack the data in the cables, it doesn’t mean that they can’t be hacked. This is because all you need to do is to achieve the network tap and physical access to the cable and you will be able to hack it.

It’s Very easy to Install The Cable

As the cable was hard to install a few years ago, stuff has changed now as technologies have changed. If you wish to install the cable you just need to contact installation professionals and the cable will likely be installed within a very short time.

The Cables Aren’t Impacted By Environmental Conditions

Because the fibers carry light, they aren’t disturbed by alterations in temperature, cold, rain or some other environmental condition. This is not the case with copper cables that are usually impacted by environmental conditions. For example, when it’s cold, the cables transmit data much faster than when it’s hot.

They Support Wireless

The cables are heavily employed by telecommunication companies to carry wireless telephone signals from the towers for the central network. The fibers are preferred by many companies due to their large bandwidth and long term compatibility using the network equipment.

Just like copper cables, NEC (National Electrical Code) requires Secondary Coating Line be marked making use of their fire and smoking ratings. NEC requires all indoor fiber cables be marked correctly and installed properly for the intended use. In accordance with NEC, a building’s inside area is divided into three varieties of sections: plenums, risers and general purpose areas.

A Plenum area is a building space utilized for air flow or air distribution system. In most buildings, the region above a drop ceiling or under a raised floor is utilized as the air return (source of air) for that air conditioning. Those drop ceiling and raised floors are also where fiber cables are frequently installed. If those cables were burning, they might produce toxic fumes and the fumes will be fed to the remainder of the building by the air conditioning unit. Because of this, people could be injured while they are a considerable ways through the fire.


These are the facts you need to find out about optic cables. When purchasing the units you need to make sure that you get them from authorized dealers. After buying them you should make certain you set them up professionally. In the event you don’t have the skills you should hire a seasoned professional to install them for you. We manufacture different eygmcn of optic fiber cable equipment such as Optical cable sheathing line and several other equipment. Visit the given links to learn a little more about us.

When performing fusion splicing you will need a Fusion Splicer, fusion splice protection sleeves, and isopropyl alcohol and stripping tools. If you are using a mechanical splice, you will require stripping tools, mechanical splices, isopropyl alcohol along with a mechanical splice assembly tool. When hand terminating a fiber you will require 99% isopropyl alcohol, epoxy/adhesive, a syringe and needle, polishing (lapping) film, a polishing pad, a polishing puck, a crimp tool, stripping tools, fiber optic connectors ( or splice on connectors) and piano wire.

When a termination is done you must inspect the end face from the connector with SZ Stranding Line. Being sure that light is becoming through either the splice or even the connection, a Visual Fault Locator may be used. This piece of equipment will shoot a visible laser down the fiber cable so you can tell that there are no breaks or faulty splices. In the event the laser light stops down the fiber somewhere, there is most probably an escape within the glass when this occurs. If you have greater than a dull light showing on the connector point, the termination was not successful. The sunshine should also go through the fusion splice, if it will not, stop and re- splice or re-terminate.